revised: january 7, 2009 277 ? 2009 littelfuse, inc. speci?cations are subject to change without notice. axial lead & cartridge fuses 219xa series 520 mm > time-lag > 219xa series please refer to www.littelfuse.com/series/219xa.html for current information. 219xa series agency approvals features electrical characteristics for series % of ampere rating ampere rating opening time 150% 40ma C 100ma 1 hours, minimum 125ma C 6.3a 1 hours, minimum 210% 40ma C 100ma 2 minutes, maximum 125ma C 6.3a 2 minutes, maximum 275% 40ma C 100ma 0.2 sec., min; 10 sec. max 125ma C 6.3a 0.6 sec., min; 10 sec. max 400% 40ma C 100ma 0.04 sec., min; 3 sec. max 125ma C 6.3a .15 sec., min; 3 sec. max 1000% 40ma C 100ma .01 sec., min; 0.3 sec. max 125ma C 6.3a .02 sec., min; 0.3 sec. max applications agency agency file number ampere range ps e cartridge certi?cations: nbk220604-e10480a nbk230604-e10480a leaded certi?cations: nbk220604-e10480b nbk230604-e10480b 1a C 5a 6.3a 1a C 5a 6.3a certi?cations: 2004010207110266 2003010207079982 125ma C 800ma 1a C 6.3a recognised file: e10480 guide: jdyx2 40ma C 6.3a file and acc. class: 029862_0_000 125ma C 6.3a license: km41462 file: 604904/604924 402708 310144 40ma C 100ma 125ma C 800ma 1a C 6.3a license: 40016080 125ma C 6.3a 40ma C 6.3a t % f t j h o f e u p international (iec ) standards for use globally t . f f u t u i f * & $ 60127-2, sheet 6 speci?cation for time- lag fuses t " w b j m b c m f j o d b s u s j e h f and axial lead form t 3 p ) 4 d p n q m j b o u b o e lead-free 5x20mm time-lag glass body cartridge fuse designed to iec speci?cation used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. 219xa series, 5x20mm, time-lag (slo-blo ? ) fuse ps e description
revised: january 7, 2009 introduction to circuit protection introduction to circuit protection transientology 278 ? 2009 littelfuse, inc. speci?cations are subject to change without notice. axial lead & cartridge fuses 219xa series 520 mm > time-lag > 219xa series please refer to www.littelfuse.com/series/219xa.html for current information. amp code amp rating (a) voltage rating (v) interrupting rating nominal cold resistance (ohms) nominal melting i 2 t (a 2 sec) nominal voltage drop at rated current (mv) nominal power dissipation at rated current (w) agency approvals ps e .040 0.040 250 150a @ 250vac 31.8620 0.01100 4000 1.6 x x x .050 0.050 250 21.2920 0.01700 3500 1.6 x x x .063 0.063 250 14.2685 0.02850 3000 1.6 x x x .100 0.100 250 6.0180 0.07900 2500 1.6 x x x .1250.125250 4.2000 0.13000 2000 1.6 xxxxxxx .160 0.160 250 2.5500 0.31000 1900 1.6 xxxxxxx .200 0.200 250 1.6000 0.32000 1500 1.6 xxxxxxx .250 0.250 250 1.0495 0.54000 1300 1.6 xxxxxxx .315 0.315 250 0.8475 1.23000 1100 1.6 xxxxxxx .400 0.400 250 0.5350 1.4 0000 1000 1.6 xxxxxxx .500 0.500 250 0.3700 3. 00000 900 1.6 xxxxxxx .630 0.630 250 0.2750 4.82000 300 1.6 xxxxxxx .800 0.800 250 0.1635 9.35000 250 1.6 xxxxxxx 001. 1.00 250 0.1165 19.20000 150 1.6 xxxxxxxx 1.25 1.25 250 0.0817 27.15000 150 1.6 xxxxxxxx 01.6 1.60 250 0.0551 44.2 0000 150 1.6 xxxxxxxx 002. 2.00 250 0.0452 92.70500 150 1.6 xxxxxxxx 02.5 2.50 250 0.0305 138. 00000 120 1.6 xxxxxxxx 3.15 3.15 250 0.0231 202. 00000 100 1.6 xxxxxxxx 004. 4.00 250 0.0158 330. 00000 100 1.6 x x xxxxxx 005. 5.00 250 0.0117 544. 00000 100 1.6 xxxxxxxx 06.3 6.3 250 0.0117 1093.03500 100 1.6 xxxxxxxx electrical characteristic speci?cations by item
revised: january 7, 2009 279 ? 2009 littelfuse, inc. speci?cations are subject to change without notice. axial lead & cartridge fuses 219xa series 520 mm > time-lag > 219xa series please refer to www.littelfuse.com/series/219xa.html for current information. 219xa series average time current curves 0.001 0.01 0 0 0 1 0 0 1 0 1 1 1 0 . 0 0.1 1 10 100 1000 10000 time in seconds current in amperes 0.12 5 a 0.160a 0.200a 0.2 5 0a 0.31 5 a 0.400a 0. 5 00a 0.630a 0.800a 1a 1.2 5 a 1.6a 2a 2. 5 a 3.1 5 a 4a 5 a 6.3a temperature rerating curve soldering parameters - wave soldering dwell t ime 0 20 4 0 60 80 100 120 1 4 0 160 180 200 220 2 4 0 260 280 300 0 10 20 30 4 0 5 0 60 70 80 90 100 110 120 130 1 4 0 1 5 0 160 170 180 190 200 210 220 230 2 4 0 t ime (seconds) t emperature (c) - measured on bottom side of board cooling t ime preheat t ime wave parameter lead-free recommendation preheat: (depends on flux activation temperature) (typical industry recommendation) temperature minimum: 100 c temperature maximum: 150 c preheat time: 60-180 seconds solder pot temperature: 260 c maximum solder dwell time: 2-5 seconds recommended hand-solder parameters: solder iron temperature: 350 c +/- 5c heating time: 5 seconds max. note: these devices are not recommended for ir or convection re?ow process. recommended process parameters:
revised: january 7, 2009 introduction to circuit protection introduction to circuit protection transientology 280 ? 2009 littelfuse, inc. speci?cations are subject to change without notice. axial lead & cartridge fuses 219xa series 520 mm > time-lag > 219xa series please refer to www.littelfuse.com/series/219xa.html for current information. product characteristics materials body: glass cap: nickel plated brass leads: tin plated copper terminal strength mil-std-202g, method 211a. test condition a solderability reference iec 60127 second edition 2003-01 annex a product marking cap 1: brand logo, current and voltage rating cap 2: agency approval markings series packaging available in bulk (m=1000 pcs/pkg) or on tape/reel (mret1=1000 pcs/reel) operating temperature C55oc to +125oc shock mil-std-202g, method 107g, test condition b: (5 cycles C65 o c to +125 o c) vibration mil-std-202g, method 201a humidity mil-std-202g, method 103b, test condition a high rh (95%) and elevated temperature (40 o c) for 240 hours. salt spray mil-std-202f method 101d, test condition b dimensions 0219 000xap 20+0.5 5.1+0.6 5.2+0.1 -0.2 5.1+0.6 0219 000 xaep 0.65* 40 22.5 max 5.8 max all dimensions in mm notes: * ratings above 6.3a have 0.8 mm dia lead packaging packaging option packaging speci?cation quantity quantity & packaging code taping width 219xa series bulk n/a 1000 mxa n/a bulk n/a 1000 mxae n/a reel and tape n/a 1000 mraet1 t1=52mm (2.062) part numbering system 0219 xxxx m xa e p series amp code refer to amp code column of electrical characteristics t able lead-free quantity code m = 1000 option codes blank : cartidge t ype fuse e : axial leaded fuse packaging code x = filler a = enhanced l sq t
|
